Fender, Removing And Installing: Removing: Notes

-- Open the front door.

-- Push aside the end plate -1- in the upper area using the :3409  .

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -arrow-.

-- RS3: Remove the windshield washer fluid reservoir. Refer to WINDSHIELD WASHER SYSTEM .

-- Remove the bumper cover mount. Refer to BUMPER COVER MOUNT, REMOVING AND INSTALLING .

-- If equipped remove the damper for the fender.

-- Remove the bolts -2 and 3-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the sealing piece. Refer to SEALING PIECE, REMOVING AND INSTALLING .

-- Remove the bolts -1 and 2-.

Courtesy of AUDI OF AMERICA, LLC

-- RS3: Slide the fender -1- towards the A-pillar -arrow- and remove upward out of the retaining tab -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the fender.