Fender Brace, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .
-- Remove the headlamps. Refer to HEADLAMPS .
-- For vehicles with a TDI engine, loosen and set aside the fuel filter. Refer to FUEL FILTER For engine(s) CRUA] .
-- Free up the wiring harness -4- from the fender brace -5-.
-- Slightly lift the wiring channel -3- in the direction of -arrow- and loosen the bolt -1-.
-- Remove the bolts -2 and 6-.
-- Remove the bolt -1- from below turning to the right using an E5 external TORX® .
-- Remove the fender brace -2-.