Roof Trim Molding, Removing And Installing, SPORTBACK With Gloss Package: Removing
WARNING: This page is about a different variant/trim than selected.
NOTE:
Do not bend the roof trim molding.
-- Open the front and rear doors.
-- So that the paint is not damaged, tape off the area around the roof trim molding on the A-pillar using adhesive tape -2-.
-- Pry up the roof trim molding -1- with a :T10383/1 , from the A-pillar beginning from the clips in the direction of -arrow-.
-- Remove the roof trim molding -2- in the area of the rear side window from the clips -1-.
-- Have a second technician hold the roof trim molding so that the paint is not damaged.
-- So that the paint is not damaged, tape off the area around the side window trim molding -3- with adhesive tape.
-- Pull the roof trim molding -2- out of the clips -1- in the side window in the direction of -arrow-.
-- Remove the roof trim molding.