Side Window Trim Molding, Removing And Installing, SPORTBACK With Gloss Package: Installing
WARNING: This page is about a different variant/trim than selected.
Install in reverse order of removal and note the following:
-- Coat the side window rubber strips and the side window trim molding with tire mounting paste.
-- Position the side window trim molding -1- to the body on the C-pillar at the corner -arrow- of the rubber strip.
- The rubber strip -2- must be above the trim molding.
- The clips -4- must be parallel to the side window trim molding.
-- Press the side window trim molding onto the clips until it clicks into place.
- At the same time the rubber strip must cover the side window trim molding.
- The rubber strip -3- must be installed into the curve in the side window trim molding using :T10383/1 .
-- Install the roof trim molding. Refer to ROOF TRIM MOLDING, REMOVING AND INSTALLING .