Left/Right Rear Turn Signal Bulb -M6- / -M8-, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the tail lamp. Refer to TAIL LAMP, REMOVING AND INSTALLING .
-- Push the locking bracket in direction of -arrow- and remove the bulb socket -1- from the housing.
-- Remove the rear turn signal bulb from the bulb carrier.
-- Remove the tail lamp. Refer to TAIL LAMP, REMOVING AND INSTALLING .
-- Push the locking bracket in direction of -arrow- and remove the bulb socket -1- from the housing.
-- Remove the rear turn signal bulb from the bulb carrier.