Left/Right Back-Up Lamp Bulb -M16- / -M17-, Removing And Installing, Tail Lamps With Bulbs: Removing
WARNING: This page is about a different variant/trim than selected.
-- Turn the light switch to position "0".
-- Insert a small screwdriver into the opening -arrow A- and remove the cover -1- in the direction of -arrow B-.
Vehicles Through My 2016
-- Disconnect the connector -5-.
-- Release the locking brackets -1 and 4- and remove the bulb socket -2- from the housing.
-- Remove the back-up lamp bulb -3- from the bulb carrier.
Vehicles from MY 2017
-- Disconnect the connector -3-.
-- Release the locking brackets -1- and remove the bulb socket -2- from the housing.
-- Remove the back-up lamp bulb -4- from the bulb holder.