Left/Right License Plate Lamp -X4- / -X5-, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Turn the light switch to position "0".

-- Remove the license plate lamp -3- from the rear lid by positioning a screwdriver -1- at the slit -2- and sliding it in the direction of -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Turn the headlamp switch to "0".

-- Remove the screw -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Pry bulb carrier out of handle cover strip.

-- Remove the bulb from the socket.