High-Mounted Brake Lamp Bulb -M25-, Removing And Installing: Installing
WARNING: This page is about a different variant/trim than selected.
Install in the reverse order of removal. Note The Following:
NOTE:
If LED's are malfunctioning, high-mount brake light must be completely replaced.
Install in the reverse order of removal. Note The Following:
NOTE:
The entire high-mounted brake lamp must be replaced in the event of faulty LEDs.
-- The mount -2- for the high-mounted brake lamp -3- must engage evenly at the left and right in the guide rails -1-.
-- Slide the high-mounted brake lamp evenly forward in the direction of travel without tilting it until it engages audibly -arrows-.
Install in the reverse order of removal. Note The Following:
NOTE:
If LED's are malfunctioning, high-mount brake light must be completely replaced.