Left And Right Daytime Running Lamp And Position Lamp Led Module -L176- / -L177-, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Turn the light switch to position "0".
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Do not operate the flashers.
-- Remove the front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .
-- Remove the bolts -arrows-.
-- Remove the LED module -1- from the headlamp housing -2-.
-- Press the release button and disconnect the connector -3-.