Headlamp, Removing And Installing, Halogen Headlamps: Removing
WARNING: This page is about a different variant/trim than selected.
-- Turn the light switch to position "0".
-- Turn off the ignition and all electrical consumers and remove the ignition key.
-- Do not press the flasher.
-- Remove the front bumper cover. Refer to FRONT BUMPER COVER, REMOVING AND INSTALLING .
-- Remove the bolts -arrow-.
-- Remove the mount -1- forward. Do not damage the headlamp guide -2-.
-- Remove the bolts -arrows-.
-- Disconnect the connector -1-.
-- Remove the ventilation hose -1- from the bracket -2-.
-- Release the securing tab -4- in direction of -arrow- and remove the headlamp -3- toward the front.