LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A3 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Bumpers -- (A3 Sedan)) >> 63 Bumpers >> Rear Bumper >> Bumper Cover, Removing And Installing >> Bumper Cover, Removing And Installing >> Installing

Bumper Cover, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install In Reverse Order Of Removal and Note The Following: 

-- Adhesive pad. Refer to the appropriate service information.

Depending on the version, the following additional procedures are required:

-- Calibrate the lane change assistance. Refer to LANE CHANGE ASSISTANCE, CALIBRATING .

scientia non olet · About LEMON Manuals