LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A3 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Bumpers -- (A3 Sedan)) >> 63 Bumpers >> Rear Bumper >> Attachments, Removing And Installing >> Wheel Housing Extension, Removing And Installing >> Removing

Wheel Housing Extension, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

Sportback: 

GWWA63-11089Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1-.

-- Remove the expanding rivet -2-.

-- Remove the wheel housing extension -3-.

Sedan:

GWWA63-11370Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1-.

-- Carefully warm the wheel housing extension -2- using the :VAG1416  .

-- Loosen the trim panels -arrows- and remove the wheel housing extension.