LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A3 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Bumpers -- (A3 Sedan)) >> 63 Bumpers >> Front Bumper >> Attachments, Removing And Installing >> Side Air Intake Grille Trim, Removing And Installing, A3 S Line And S3 Through My 2016 >> Removing

Side Air Intake Grille Trim, Removing And Installing, A3 S Line And S3 Through My 2016: Removing

WARNING: This page is about a different variant/trim than selected.

-- Loosen the wheel housing liner in at the front and move it to the side. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Grasp behind the bumper cover and pull the catches -arrows- of the trim -2- from the bumper cover -1-.

GWWA63-10711Courtesy of AUDI OF AMERICA, LLC

-- Remove the air intake grill side trim.