LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A3 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Interior Equipment -- (Sedan)) >> 68 Interior Equipment >> Center Console >> Center Console Bracket, Removing And Installing >> Removing

Center Console Bracket, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the center console. Refer to CENTER CONSOLE, REMOVING AND INSTALLING .

Center Console Font Bracket:

GWWA68-10627Courtesy of AUDI OF AMERICA, LLC

-- Push aside the carpet in the area of the threaded connection and remove the nut -1-.

-- Remove the center console bracket -2-.

Rear Center Console Bracket:

GWWA68-10631Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 and 2-.

-- Remove the bracket -3- from the center console.

Center Console Securing Bracket:

GWWA68-10671Courtesy of AUDI OF AMERICA, LLC

-- Unclip the wiring harness -1 and 3- from the securing bracket.

-- Disconnect and free up the connectors.

-- Remove the nuts -2 and 5- and remove the securing bracket -4-.