Rear Lid Unlock Switch -E165- /Fuel Filler Door Release Button -E319-, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove The Front Door Trim Panel. Refer to FRONT DOOR TRIM PANEL, REMOVING AND INSTALLING .
-- Disconnect the connector -3-.
Fig 1: Rear Lid Unlock Switch -E165-, market-specific USA and Canada /Fuel Filler Door Release Button -E319-, A3 e-tron
-- Open the clip -2- and remove the trim -3- with the switch from the door trim panel in direction of -arrow-.
-- Release the hooks in direction of -arrows- carefully with a small screwdriver.
-- Remove the switch -1- toward the rear from the trim -2-.