Ribbed Belt Pulley With Freewheel, Removing And Installing: Removing
-- Remove the generator if necessary. Refer to OVERVIEW - GENERATOR / GENERATOR, REMOVING AND INSTALLING .
-- For some engine types the removal can be performed with the generator still installed, here only the ribbed belt must have the tension released and be removed.
-- Clamp the generator in a vise at the mounting points.
-- If equipped, remove the protective cap from the decoupling belt pulley with freewheel.
-- Install the :T10474 or :3400 -1- in the belt pulley and attach a wrench.
-- Place a suitable tool -2- in the generator shaft.
-- Turn the generator shaft clockwise in direction of -arrow- to loosen and while doing so counterhold with the wrench.
-- Hold the ribbed belt pulley with freewheel in place by hand and turn it at the generator shaft until the ribbed belt pulley with freewheel can be removed.