LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A3 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Technical Data Servicing 2.0L (CNSB, CNTC, CYFB)) >> 00 Technical Data >> Safety Precautions >> Safety Precautions When Working On Ignition System

Safety Precautions When Working On Ignition System

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Risk of injury due to electrocution

The ignition system is under high voltage when the engine is running. It is possible to be electrocuted by touching the ignition system.

-- Never touch or remove the ignition wires when the engine is running or at cranking speed.

Risk of damaging components

Washing the engine as well as connecting and disconnecting wires when the engine is running can damage components.

-- Switch off the ignition before connecting and disconnecting wires.

-- Switch off the ignition before washing the engine.