Gear Oil, Draining
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the noise insulation. Refer to NOISE INSULATION .
-- Remove the nuts -arrows- and remove the right drive axle heat shield.
-- Place the :SMN372500 underneath.
CAUTION:
- Wear protective eyewear.
- Wear acid-resistant safety gloves.
-- Remove the oil drain plug -A-.
-- Let the gear oil drain.
-- Tighten the oil drain plug -A-.
-- Remove the plug -B- from the oil filler hole.
-- If the gear oil level is too low, add bevel box gear oil. Refer to the Parts information for the correct gear oil.