Gear Oil, Filling: Notes

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

All safety precautions and test conditions must be followed.

-- Remove the nuts -arrows- and remove the right drive axle heat shield.

-- Route the hose for the :VAS6291A upward.

-- Install the :VAS6291/3 until it stops.

-- Attach the charging device hose with the :VAS6291/3 .

-- Check if the valve -arrow- is closed.

-- Attach the oil container -A- to the :VAS6291A .

-- Open the valve -arrow- and hold up the oil container as illustrated.

When gear oil flows out at the :VAS6291/3 , the gear oil level is OK.

-- Tip the oil container so that any excess oil can flow back into the container.

-- When there is no more oil flowing back, disconnect the charging device by pushing the tab.

-- Remove the :VAS6291/3 .