Overview - Turbocharger: Notes
WARNING: This page is about a different car, the 2017 Audi S3, 2016 Audi S3, 2016 Audi A3, 2015 Audi S3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Part I
Part II. Refer to OVERVIEW - TURBOCHARGER Part II .
- O-ring
- Always replace
- Coat with engine oil
- Bolt
- 9 Nm
- Coolant Supply Line
- O-ring
- Always replace
- Coat with coolant
- Seal
- Always replace
- Nut
- 25 Nm
- Always replace
- Turbocharger
- Removing and installing. Refer to TURBOCHARGER, REMOVING AND INSTALLING .
- Oil Supply Line
- Heat Shield
- Bolt
- 9 Nm
- Nut
- 9 Nm
- Bolt
- 9 Nm
- O-ring
- Always replace
- Coat with engine oil
- Bolt
- 9 Nm
- Bolt
- 9 Nm
- Connection
- O-ring
- Always replace
- Bolt
- 9 Nm
Part II
Part I. Refer to OVERVIEW - TURBOCHARGER .
- Bolt
- 9 Nm
- Oil Return Line
- O-ring
- Always replace
- Coat with engine oil
- Bolt
- Must not be loosened
- Charge Air Pressure Actuator -V465-
- No replacement part in turbocharger package
- Adjusting. Refer to Charge Air Pressure Actuator -V465-, ADJUSTING .
- Nut
- 10 Nm
- Bolt
- 9 Nm
- Connection
- O-ring
- Always replace
- Bolt
- 9 Nm
- Turbocharger Recirculation Valve -N249-
- Note the installation position. Refer to TURBOCHARGER RECIRCULATION VALVEN249 INSTALLATION POSITION .
- O-ring
- No replacement part; Turbocharger Recirculation Valve -N249- in the delivery package
- Turbocharger
- Removing and installing. Refer to TURBOCHARGER, REMOVING AND INSTALLING .
- O-ring
- Always replace
- Coat with coolant
- Bolt
- 9 Nm
- Bolt
- 9 Nm
- Bolt
- 9 Nm
- Coolant Return Line
- O-ring
- Always replace
- Coat with coolant
- O-ring
- Always replace
- Coat with engine oil
- Bolt
- 30 Nm
- Coat the thread with hot bolt paste. Refer to the Parts Information.
- Bracket
- For the turbocharger
- Bolt
- 20 Nm + 90° additional turn
- Always replace
- Bolt
- 9 Nm