Overview - Charge Air System
WARNING: This page is about a different car, the 2017 Audi S3, 2016 Audi S3, 2016 Audi A3, 2015 Audi S3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Before testing or performing a repair, check all air duct pipes and hoses and vacuum lines for leaks and secure seating.
Observe the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
- Air Duct Pipe
- Grommet
- Spacer Sleeve
- Bolt
- 7 Nm
- Air Duct Hose
- Installing. Refer to CHARGE AIR SYSTEM .
- Air Duct
- Charge Air Cooler
- Removing and installing. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING .NOTE:
If there are small impressions on the slats. Refer to appropriate service information .
- Removing and installing. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING .
- Air Duct
- Rubber Bushing
- For the charge air cooler
- Rubber Bushing
- For the charge air cooler
- Bolt
- 7 Nm
- Spacer Sleeve
- Grommet
- Bolt
- 5 Nm
- Charge Air Pressure Sensor -G31-
- Removing and installing. Refer to Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING .
- O-ring
- Always replace
- Air Duct Hose
- Installing. Refer to CHARGE AIR SYSTEM .
- Air Duct Pipe