Charge Air System, Checking For Leaks: Notes
WARNING: This page is about a different car, the 2017 Audi S3, 2016 Audi S3, 2016 Audi A3, 2015 Audi S3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Turbo System Tester Kit:VAG1687
Procedure
-- Loosen the hose clamps -1 and 2- and remove the air duct pipe.
-- Connect the :VAG1687/10 with the :VAG1687/14 to the turbocharger.
-- Connect the :VAG1687 to the adapter.
All additional procedures are described. Refer to CHARGE AIR SYSTEM .