Vacuum Sensor -G608-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Vehicles with 4-cylinder engine:

-- Remove the check valve. Refer to CHECK VALVE, REMOVING AND INSTALLING .

Vehicles with 2.5L TFSI engine

Fig 1: Loosen Clamps And Remove Air Guide Pipe

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the hose clamps -arrows- and remove the air duct pipe.

Continuation for All Vehicles:

Courtesy of AUDI OF AMERICA, LLC

-- Release the retainers -arrows- and remove the Vacuum Sensor -G608- -item 1- from the check valve.