Vacuum Pump, Removing And Installing, 4-Cylinder TFSI Engines: Removing
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the high pressure pump. Refer to HIGH PRESSURE PUMP, REMOVING AND INSTALLING [CNTC] / HIGH PRESSURE PIPE, REMOVING AND INSTALLING [CZPB, CZRA, DBFB] .
CAUTION:
Risk of damaging the coolant line.
- Do not change the shape of the coolant line.
-- Remove the bolts -1, 2 and 3- and carefully push the coolant line slightly to the side.
NOTE:
Ignore -item 4- and -arrow-.
-- Remove the vacuum hose -2- from the vacuum pump -1- by pressing the release buttons on both sides.
-- Remove the bolts -arrows- and remove the vacuum pump.