Bearing Bushing And Guide Pin, Replacing: Installing

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Insert the new bearing bushing into the brake caliper.

The bearing bushing must be seated in the center of the brake caliper.

-- Thinly coat the guide pin with grease from the repair kit.

-- Push the guide pin into the bearing bushing.

-- Make sure that both guide pins move easily.

Both guide pins must be able to slide.

-- Install the brake pads. Refer to BRAKE PADS, REMOVING AND INSTALLING .