Hydraulic System, Bleeding Without Brake Charger/Bleeding Unit: Notes
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Container
- Brake Bleeding Tool Set:VAS6564
- Wrench - Brake Bleeder Set:VAS5519
PROCEDURE
-- Fill the brake fluid reservoir with brake fluid up to the "max" mark.
-- Screw down the container.
NOTE:
Use suitable bleeder hose. It must seat tightly on the bleeder screw so that no air can enter the brake system.
-- Remove the protective cap on brake caliper bleeder screw and attach the bleeder bottle bleed hose to the bleed screw.