Overview - Front Brake Caliper, Single-Piston Brake
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Clean the bolts and nuts before reusing.
Always replace self-locking nuts and bolts.
Always replace damaged nuts and bolts.
- Brake Caliper
- Guide Pin
- Bearing Bushing
- For the guide pins
- Refer to BEARING BUSHING AND GUIDE PIN, REPLACING
- Seal
- Removing and Installing. Refer to BRAKE CALIPER PISTON, REMOVING AND INSTALLING, SINGLE-PISTON BRAKE .
- Do not damage when installing the brake caliper piston
- Brake Caliper Piston
- BRAKE CALIPER PISTON, REMOVING AND INSTALLING, SINGLE-PISTON BRAKE
- Thinly coat with Lithium Grease:G 052 150 A2 . Refer to the Parts Information.
- Protective Cap
- Removing and Installing. Refer to BRAKE CALIPER PISTON, REMOVING AND INSTALLING, SINGLE-PISTON BRAKE .
- Pull onto the brake caliper piston with the outer sealing lip
- Do not damage when installing the brake caliper piston
NOTE:
Clean the bolts and nuts before reusing.
Always replace self-locking nuts and bolts.
Always replace damaged nuts and bolts.