Bearing Bushing And Guide Pin, Replacing: Installing
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Grease the guide pin before inserting.
-- Slide the bearing bushing over the groove on the guide pin.
-- Slide the guide pins -3- with the bearing bushings -2- through the brake carrier -1-.
-- Press the bearing bushing over the groove on the brake carrier.
-- Install the brake caliper. Refer to BRAKE CALIPER, REMOVING AND INSTALLING .