Fuel Level Sensor 2 -G169- is Removed, Except Country Specific NAR
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
To check the resistance values "tank full" or "tank empty", the fuel level sensor must be removed and the sensor floater must be moved to the upper or lower stop.
With the fuel level sensor removed, the following values are obtained because of the greater movement of the floater arm:
-- Connect the multimeter for resistance measurements shown in the table.
| Measurement at Contact | Tank Empty | Tank Full |
|---|---|---|
| 2 + 3 | 297 to 303 Ω | 51 to 53 Ω |
| 1 + 3 | 37 to 43 Ω | 281 to 289 Ω |
| 1 + 2 1) | 335 to 345 Ω | 335 to 345 Ω |
| 1) Arbitrary sensor position | ||