Leak Detection Pump -V144-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the EVAP canister. Refer to EVAP CANISTER, REMOVING AND INSTALLING, NORTH AMERICAN VEHICLES .

-- Remove the vent hose -1- by pressing the releases.

Fig 1: Leak Detection Pump -V144-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -3-.

-- Remove the Leak Detection Pump -V144- -2- from the EVAP canister.