Transmission, Removing: Notes
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Pry Lever: 80-200
- Hose Clamps - Up To 25mm: 3094
- Transmission Support: 3282
- Transmission Support - Pins 29: 3282/29
- Transmission Support - Mounting Plate 42A: 3282/42A
- Engine Bung Set: VAS6122
- Engine and Gearbox Jack: VAS6931
- Hose Clamps - Up To 25 mm: 3094
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Bolts - Subframe
- Bolts - Transmission
- Bolts - Drive Axle
- Bolts - Transmission Bracket
- Bolts - Driveshaft
- Bolts - Bevel Box
NOTE:
Pay attention to the general information. Refer to GENERAL INFORMATION .
Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
Follow the general repair information. Refer to GENERAL REPAIR INFORMATION .
Bring all cable ties back to same positions during installation.