Transmission Fluid, Filling

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Oil Filling Adapter - VAS 6262 A-

Courtesy of AUDI OF AMERICA, LLC

-- Shake the container before opening.

-- Attach the transmission fluid container to the : VAS6262A .

-- Install the : VAS6262A into the opening for the drain and check plug -arrow 1- hand-tight.

Courtesy of AUDI OF AMERICA, LLC

-- Hold the container with the : VAS6262A as high as possible over the transmission and fill the transmission with approximately 5.2 liters (5.5 qts) of transmission fluid.

-- Shift the selector lever into "P" and push the parking brake button to activate the electro-mechanical parking brake.

-- Press the brake pedal and hold it down.

-- Start the engine and let it run in idle.

-- With the brake pressed, shift through all selector lever positions "P, R, N, D/S" at idle, retaining each position for at least 3 seconds.

-- Move the selector lever into "P" position.

-- Check the transmission fluid level. Refer to TRANSMISSION FLUID LEVEL, CHECKING .