LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A3 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Controls, Housing (0D9) (2 Of 2) -- (A3)) >> 34 Controls, Housing >> Transmission Fluid Circuit >> Transmission Fluid Cooler, Removing And Installing >> Installing

Transmission Fluid Cooler, Removing And Installing: Installing

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Replace the transmission fluid cooler bolts.

-- Replace the O-rings.

-- Check the transmission fluid level. Refer to TRANSMISSION FLUID LEVEL, CHECKING .

-- Checking coolant level. Refer to COOLANT, DRAINING AND FILLING [For engine(s) CNTC]COOLANT, DRAINING AND FILLING [For engine(s) CZRA] .