Selector Lever Handle, Removing And Installing: Removing

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Press the parking brake button to activate the electro-mechanical parking brake.

-- Move the selector lever into "D/S".

-- Turn off the ignition.

Audi TT:

Courtesy of AUDI OF AMERICA, LLC

-- Unclip the selector lever boot on both sides using the : 3409 in direction of -arrows- and fold it upward.

Audi A3, Q2:

Courtesy of AUDI OF AMERICA, LLC

-- Carefully pry out the selector lever boot with the Wedge Set : T10383/1 on both sides -arrows- and then fold it upward.

All Vehicles:

Courtesy of AUDI OF AMERICA, LLC

-- Turn the locking ring all the way in the direction of -arrow A-.

The tab -1- on the locking ring is offset to the tab -2- on the selector lever handle.

-- Remove the selector lever handle -1- upward with the selector lever boot in direction of -arrow A- without touching the locking button -2-.

Courtesy of AUDI OF AMERICA, LLC