Transmission Fluid Pump, Removing And Installing: Removing
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Drain the transmission fluid (refer to TRANSMISSION FLUID, DRAINING AND FILLING ) and leave the : SMN372500 underneath.
-- Remove the left front wheel housing liner. Refer to WHEEL HOUSING LINER .
-- Remove the bolts -arrows- and remove the transmission fluid pump cover -A-. While doing so, allow the transmission fluid still in the cover to drain into the : SMN372500 .
-- Remove the bolts by using the : T10054 for the upper bolt -arrow-.
-- Remove the transmission fluid pump from the alignment pins and the input shaft.