Overview - Assembly Mounts
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- 1 - 6 -Engine Mount
Refer to SUBFRAME MOUNT [For engine(s) CNTC]SUBFRAME MOUNT [For engine(s) CZRA]
- 7 -Pendulum Support
- Removing and Installing. Refer to SUBFRAME MOUNT [For engine(s) CNTC]SUBFRAME MOUNT [For engine(s) CZRA] .
- 8 -Bolt
- 130 Nm + 90°
- Always replace after removing
- 9 -Bolt
- 50 Nm + 90°
- Always replace after removing
- 10 -Bolt
- Always replace after removing
- 50 Nm + 90°
- 11 -Bolt
- 60 Nm + 90°
- Always replace after removing
- 12 -Bolt
- 50 Nm + 90°
- Always replace after removing
- 13 -Transmission Mount
- With support arm
- Removing and Installing. Refer to SUBFRAME MOUNT [For engine(s) CNTC]SUBFRAME MOUNT [For engine(s) CZRA] .
- 14 -Transmission Support
- 15 -Bolt
- 40 Nm + 90°
- Always replace after removing