Dual Clutch, Removing: Notes
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Clutch Cover Plate Guide Sleeve :T10302 for clutch end cover without bushing
- Clutch Retaining Bar :T10303
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Circlip - Drive Plate
-- Clean the :T10302 before using, and do not use any scratched sleeves.