LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A3 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (FINAL DRIVE, DIFFERENTIAL (0D9) (2 Of 2) -- (CABRIOLET)) >> 39 Final Drive, Differential >> Bevel Box >> Bevel Box Seals, Replacing >> Installing

Bevel Box Seals, Replacing: Installing

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- The shaft must be rotated while pressing off in direction of -arrow- so that the contact surface on the needle bearing does not get damaged.

-- The shaft must be rotated while installing in direction of -arrow- so that the contact surface on the needle bearing does not get damaged.

GWWN39-0786

-- Secure the needle bearing with a new circlip.

-- Install the right flange shaft. Refer to LEFT FLANGE SHAFT, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals