Oil Pan Upper Section - Tightening Specifications And Sequence
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- The three bolts -9 to 11- are specially coated with sealing paint, pay attention to the allocation when installing.
- Allocation of the bolts. Refer to the Parts Informationl.
- Replace the bolts.
- Tighten the new bolts in steps in the sequence shown.
| Step | Bolts | Tightening Specification/Additional Turn |
|---|---|---|
| 1. | -1 through 18- | Diagonally to 5 Nm |
| 1. | -1 through 18- | Then diagonally to 13 Nm |
| 2. | -arrows- | 40 Nm |