Oil Level Thermal Sensor -G266-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Engine oil drained. Refer to appropriate service information

-- Disconnect the connector -arrow- from the Oil Level Thermal Sensor -G266-.

Fig 1: Identifying Connector From Oil Level Thermal Sensor

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the fasteners -arrows-, and remove the oil pan noise insulation -1-.

Fig 2: Identifying Noise Insulation

Courtesy of AUDI OF AMERICA, LLC

1 Part Oil Pan:

-- Remove the bolts -1-, remove the Oil Level Thermal Sensor -G266- -3- and seal -4-.

Fig 3: Exploded View Of Oil Level Thermal Sensor - G266 -

Courtesy of AUDI OF AMERICA, LLC

2 part Oil Pan:

-- Remove the nuts -1-, remove the Oil Level Thermal Sensor -G266- -4- and gasket -2-.

Fig 4: Exploded View Of Oil Level Thermal Sensor G266

Courtesy of AUDI OF AMERICA, LLC