Accessory Assembly Bracket - Tightening Specifications And Tightening Sequence
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Insert the new bolts as follows:
- Bolts -1, 2, 3 and 6- M10 x 35.
- Bolt -4- M10 x 115.
- Bolt -5- M10 x 175.
-- Tighten the bolts in steps in the sequence shown:
| Step | Bolts | Tightening Specification/Additional Turn |
|---|---|---|
| 1. | -1 to 6- | Install the bolts all the way in by hand |
| 2. | -1 to 6- | 40 Nm |
| 3. | -4 and 5- | Tighten 180° additional turn |
| 4. | -1, 2, 3, 6- | Tighten 45° additional turn |