Gear Oil, Checking Level: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Charging Device for BorgWarner Coupling 2:VAS6291A
- Charging Device for BorgWarner Coupling 2 - Adapter 3:VAS6291/3
- Used Oil Collection and Extraction Unit:SMN372500
- Protective eyewear
- Acid-resistant safety gloves
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Plug - Oil Filler Drain
NOTE:
The bevel box has a separate axle oil fill.
Observe general notes. Refer to GENERAL INFORMATION .
Follow the rules for clean working conditions. Refer to CLEAN WORKING CONDITIONS .
Test Conditions
- Move vehicle onto a 4-column lifting platform or over a work pit so that it stands absolutely horizontal.
- The selector level is in "P".
- The parking brake button should be activated to close the electro-mechanical parking brake.
- The engine is off.