Seal On Bevel Box Between Transmission And Bevel Box, Removing And Installing: Procedure
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the bevel gear. Refer to BEVEL BOX, REMOVING .
-- Pry out the sealing ring on bevel box using the :T20143/1 or :T20143/2 .
-- Coat outer circumference and sealing lips of new seal with transmission fluid.
-- Fill the space between the sealing- and dust lip -arrow- half way with sealing grease; sealing grease. Refer to the parts information.
-- Install the seal all the way in using the :T10298 . Be careful not to tilt it.
-- Install the bevel box. Refer to BEVEL BOX, REMOVING .