Bevel Box Seals, Replacing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the right flange shaft. Refer to LEFT FLANGE SHAFT, REMOVING AND INSTALLING .

-- Mount the :T10047 as illustrated.

The markings "B" on both parts face each other
The depressions -arrows- must be under the bearing.

Courtesy of AUDI OF AMERICA, LLC

-- Bolt the parts together.

-- Remove the locking ring -A-.

Courtesy of AUDI OF AMERICA, LLC