Bevel Box Seals, Replacing: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- The shaft must be rotated while pressing off in direction of -arrow- so that the contact surface on the needle bearing does not get damaged.
-- The shaft must be rotated while installing in direction of -arrow- so that the contact surface on the needle bearing does not get damaged.
-- Secure the needle bearing with a new circlip.
-- Install the right flange shaft. Refer to LEFT FLANGE SHAFT, REMOVING AND INSTALLING .