Gear Oil, Draining
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the noise insulation. Refer to NOISE INSULATION .
-- Remove the nuts -arrows- and remove the right drive axle heat shield.
-- Place the :SMN372500 underneath.
CAUTION:
- Wear protective eyewear.
- Wear acid-resistant safety gloves.
-- Remove the oil drain plug -A-.
-- Let the gear oil drain.
-- Tighten the oil drain plug -A-.
-- Remove the plug -B- from the oil filler hole.
-- If the gear oil level is too low, add bevel box gear oil. Refer to the Parts information for the correct gear oil.