Gear Oil, Filling: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- All safety precautions and test conditions must be followed.
-- Remove the nuts -arrows- and remove the right drive axle heat shield.
-- Route the hose for the :VAS6291A upward.
-- Install the :VAS6291/3 until it stops.
-- Attach the charging device hose with the :VAS6291/3 .
-- Check if the valve -arrow- is closed.
-- Attach the oil container -A- to the :VAS6291A .
-- Open the valve -arrow- and hold up the oil container as illustrated.
-- Tip the oil container so that any excess oil can flow back into the container.
-- When there is no more oil flowing back, disconnect the charging device by pushing the tab.
-- Remove the :VAS6291/3 .