Right Flange Shaft, Removing And Installing, Vehicles With AWD: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Carefully install the flange shaft while rotating it at the same time.
-- Tighten the flange shaft.
-- Gear Oil, Checking Level. Refer to GEAR OIL, CHECKING LEVEL .