Replacement Part Package

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

Dual Clutch
- With locking ring
  CAUTION:
  Risk of discs in double clutch slipping.
  - Do not disassemble the double clutch.
  - The drive plate (upper part of the clutch) of a new clutch is not secured with the circlip, it only sits "taut" in the clutch.
  - The drive plate must be engaged between the teeth of the exterior clutch pack.
  - If the drive plate is loosened, the clutch discs in the clutch can slip out of place and the clutch may not be correctly set during installation under certain circumstances.
- Removing. Refer to DUAL CLUTCH, REMOVING
- Installing. Refer to DUAL CLUTCH, INSTALLING
Circlips
- Quantity: 10, different thicknesses for adjusting clutch
- Determine thickness when installing the clutch. Refer to DUAL CLUTCH, INSTALLING
Clutch End Cover
Shaft Ring
- For clutch end cover