Secondary Air Injection Pump Motor -V101-, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2016 Audi S3, 2016 Audi A3, and 2015 Audi S3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the noise insulation. Refer to NOISE INSULATION .
-- Disconnect the connector -1-.
-- Press both the release buttons -2 to 3- and remove the lines from the Secondary Air Injection Pump Motor -V101-.
-- Remove the nuts -arrows- and the Secondary Air Injection Pump Motor -V101- with the bracket.